Altec Analog Socket Modem AL2094S Manual do Utilizador descarregar pdf (Página 25)

AL2094S Designers Guide

Doc. No. DG_2094E Altec Electronic AG Seite 25 / 30

4.3 Manufacturing Considerations

The Socket Modem has been designed to be mounted onto the host board in one of two

ways.

The first method consists of soldering a DIP-40 socket to the host board and inserting the

Socket Modem into the socket.

The second way is to solder the Socket Modem directly to the host board. The most efficient

way to do this is through a wave solder process. The recommended hole size for the Socket

Modem pins is 0.036 in. ±0.003 in. in diameter. Spacers can be used to hold the Socket

Modem vertically in place during the wave solder process.

Socket Modems can be put through a water wash process.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30

Sem comentários

Altec Analog Socket Modem AL2094S Manual do Utilizador Página 25